How to Fix Water-Damaged Drywall

Whether it occurs in the ceiling of your home due to a leaky roofing system, condensation brought about by flooding or from your central air conditioning, fixing water-damaged drywall may only cause you aggravation and anxiety, especially if you have not done it at all in the first place. After all, the walls and ceilings in your house are supposed to be sturdy and solid, and cutting a hole into one must be really tough. As a matter of fact, it is actually way far from it. The process will basically take some preparatory work as well as make a little bit of a turmoil however, with a little care and patience, you can actually make the damage invisible in just some few days especially if you ask help from professional drywall contractors. 

 

In addition to that, most interior drywall is half an inch thick for walls. The thickness that is used for your ceilings is the same but ¾ inch is just very common where the design or pattern called for more rigidity. For curves and arches, ¼ inch can also be used. While it usually comes in 4 feet by 8 feet sheets, a lot of home centers stock smaller sheets and some will cut pieces of your needed size for a corresponding price. 

Identifying Water Damage to Your Drywall 

Since the gypsum drywall is soluble to water and porous in nature, getting it wet or soaked may turn into a big problem for you. Having a wet drywall will only absorb water as well as become heavy enough to pull off from nails or screw which hold it in position. In the situation where your drywall gets wet and just starts to sag prior to drying out, repairing it may just need pushing it back in the position, securing it with new screws and painting it over with a little stain-killing paint with the help of a residential drywall company. 

But if your drywall gets mushy and soft, then it is likely the gypsum drywall will crumble and also, the paper will separate once the area dries out. In that case, you will require to tear these water-damaged portions immediately thereafter. In order to drain the water in a controlled way, poke the hole through with the use of a nail to allow it to drain out. Then, place a bucket or a container underneath the area where there is hole to catch the leaking water. 

With that being said, wet drywall can also absorb water, so it is a magnet for mold. The moisture actually makes the best environment for unwanted species and the spores of the mold feast on your paper. Therefore, whether you are cleaning up from a flood or leak in your attic, you need to fix the water-damaged drywall as early as possible. Also, you want to ensure that the damaged section is thoroughly and completely dry before you start repairing and patching. Because mildew and mold can be very dangerous to one’s health, it is usual in situations when flooding is not more than 1 foot to get rid of the 18-inch drywall. Contact commercial drywall company for more information.