How to Restore Your Damaged Carpet

Carpet repair and restoration can be very difficult and costly to perform. This is the reason why it’s best to prevent your carpet from receiving any damages. You can do it by cleaning it in a regular manner with the help of professional carpet cleaning Melbourne service provider so you can make sure that it’s maintained regularly. But if your carpet already has damage, consider the restoration tips we have listed below.

Carpet Cleaning Melbourne

Sewing on a Pile

Get rid of any fiber residue from areas that are cleaned so that the base will be visible. Then, thread into your needle the thread which matches the warp in thickness and color. Holdin the V-thread of your carpet with tweezers, create a loop over the carpet V-thread and fix the base thread as well. Inject needle into the base where the thread is attached and carefully pull the thread out, pressing the thread of the carpet to the base.

Sew the second V-shaped carpet thread next to the warp thread. Continue this method until you close the whole base surface without cutting the thread. Afterwards, sew around the final piece of carpet yarn several more times to secure. Spread the new fibers as well as moisten your carpet with the use of a cotton-wool swab soaked in gasoline in order to adhere the stitched threads on the carpets with latex-coated substrates. And lastly, trim the uneven edges of the new threads using the scissors.

Fix Surface Tearing

Putting mastic. If the base of your carpet isn’t damaged, lift the torn portion of your carpet, clean the pile, then apply a thin film of quality mastic on its base. Sticking torn areas. Holding the ends of the torn part of your carpet with your bare hands, smoothen the carpet surface with the use of a smooth object like a bottle of lemonade.

By pressing your carpet firmly, move the bottle in a direction from the torn portion in various directions so that the mastic will be evenly distributed underneath the carpet between the fibers of your carpet without even squeezing it out. If the glue comes out on the carpet surface, remove it with carpet shampoo and water immediately. Then, sew the loose fibers 4 to 5 hours right after the glue dries.

Replacing Loop Carpet Yarns

Apply pressure on the hinges surrounding the lint-free portion of your carpet. With the use of a semicircular needle, sew the long piece of yarn (unwrapped) to the base, then create another stitch to make a loop. Aside from that, stretch the loop so it will match the shape of the loop of your carpet. In order to perform this, you may use a match which will standardize the loop size. Continue to create loops, without trimming the thread until the whole damaged portion is filled. Secure the edge of the yarn by creating several stitches in one place.

Fixing Gaps

With the use of an awl and the tensioner, get rid of the carpet from the grips on one end, then wrap your carpet so the gap will be visible from the incorrect side. After that, hold the corners of the gap at the angle so that it’s more convenient to sew. Then, sew the 2 edges using the thick thread alternately with short (20mm) and long (30 mm) stitches.

Submit a Comment

Your email address will not be published. Required fields are marked *